How do I lower my exhaust?
 

This video depicts the necessary techniques to lower your exhaust when installing a trailer hitch.

"To lower the exhaust, you want to separate the rubber isolators from the exhaust hanger rod. To do this, spray lubricant or a soapy water mixture on to each side of the isolators for easy removal. Then use a pry bar as a lever to separate the rubber isolator from the exhaust hanger rod. It is always a good idea to support your exhaust system when lowering. Use a wire hanger to support the exhaust from hanging freely."

Tools Required:

• Lubricant
• Pry Bar
• Wire

This video depicts the necessary steps to clean rusted threads on weld nuts when installing a trailer hitch.

Tools Required:

• Penetrating Lubricant
• Wire Brush
• Thread Tap

Use a wire brush and penetrate using a pb blaster to clean out the nut. If light scrubbing does not do the trick, we suggest using a thread tap. Use caution when threading the tap into the weld nut, it is important that when tapping out the hole, the shaft of the tap is perpendicular to the weld nut before you thread through so that the threads to not get damaged. 

In this informative video you will learn how to hook up a standard trailer appropriately and safely. The video will go through everything from using the buddy system to back up the vehicle to crossing the chains underneath the tongue. 

In this informative video you will learn how to properly and safely load your cargo carrier. The video will also illustrate the easiest way to estimate the amount of weight your rig can handle. 

This short video will teach you how to properly load a trailer. The most important thing to consider is how the weight of your cargo is distributed onto your trailer. The ideal distribution is to have 60% of the weight in front of the trailer axle, and 40% behind. Its also very important to make sure your cargo is secured properly. Always practice safe towing!